User's Manual Part 2
Table Of Contents
- Troubleshooting
- Using Discovery
- IP Addressing
- Technical Specifications
- Safety Information
- End User Software License Agreement
- ISP Information
- Glossary
- 802.11b
- 802.11g
- 10BASE-T
- 100BASE-TX
- Access Point
- Ad Hoc mode
- Auto-negotiation
- Bandwidth
- Category 3 Cables
- Category 5 Cables
- Channel
- Client
- DHCP
- DNS Server Address
- DSL modem
- Encryption
- ESSID
- Ethernet
- Ethernet Address
- Fast Ethernet
- Firewall
- Full Duplex
- Router
- Half Duplex
- Hub
- IEEE
- IETF
- Infrastructure mode
- IP
- IP Address
- ISP
- LAN
- MAC
- MAC Address
- NAT
- Network
- Network Interface Card (NIC)
- Protocol
- PPPoE
- PPTP
- RJ-45
- Server
- SSID
- Subnet Address
- Subnet mask
- Subnets
- Switch
- TCP/IP
- Traffic
- universal plug and play
- URL Filter
- WAN
- WECA
- WEP
- Wi-Fi
- Wireless Client
- Wireless LAN Service Area
- Wizard
- WLAN
- WPA
- Glossary
- Regulatory Notices for the 11g Cable/DSL Router
System Tools 75
System Tools The main frame of the System Tools screen includes four administration
items: Restart, Time Zone, Configuration, and Upgrade (Figure 57
).
Restart
Figure 57 Restart Screen
If your Router is not operating correctly, you can choose to restart the
Router by selecting Restart the Router, simulating the effect of power
cycling the unit. No configuration information will be lost but the log files
will be erased. This function may be of use if you are experiencing
problems and you wish to re-establish your Internet connection. Any
network users who are currently accessing the Internet will have their
access interrupted whilst the restart takes place, and they may need to
reboot their computers when the restart has completed and the Router is
operational again.