User's Manual Part 1

Wireless Settings 47
Wireless Settings
To improve the security of your wireless network, 3Com recommends
that you:
1. Change the SSID from its default value - see page 48
2. Enable Encryption - see page 49
3. Enable Connection Control - see page 53
Configuration Figure 32 Configuration Screen
Enable Wireless Networking
Allows you to enable/disable the wireless section of your LAN. When
disabled, no wireless PCs can gain access to either the Internet or other
PCs on your Wired or Wireless LAN through this Router.
Channel Selection
The Channel Selector allows you to specify which Channel the Router will
transmit and receive on. If another access point or Router nearby is using
the same Channel as you, there will be a reduction in the performance of
your network. If this seems to be the case, you should select a different
channel number. Usually the Wireless computers will scan to find the
correct channel, but if they don't you must configure them to use the
same Channel number as the Router.