User's Manual

7
8
9
Connect video cable(s) to the
appropriate connection on the back
of the Wireless Joey receiver. This
receiver supports HDMI technology or
RCA-type connections.
Connect the other end of the cable
to the appropriate input of your TV
or monitor. Plug the Wireless Joey
receiver and TV into a power outlet.
Turn on the TV.
Note: In most cases, connecting the
HDMI cable provides plug-and-play
control of the TV’s display resolution
and other settings. However, your TV
may require selecting a different format
to display from the Wireless Joey
receiver during setup.
Do not cover the vents on
the Wireless Joey receiver.
Covering the vents on the
Wireless Joey receiver can
cause heat build-up, which
voids the Limited Warranty.
Connecting the Devices, continued
Continued on the next page