User's Manual

6
D. Connect the PC to the AP via Ethernet, open a browser and
enter the AP’s default IP address http://10.0.0.2
to access the
GXT542U.
E. Login using user name: admin password: last 4 digits of the
MAC address (printed on the bottom of the
device)
F. Click on the System Information on the left
G. Ensure the Free Air Time is GREEN
H. Select Video Station List
I. Verify all the RSSI levels are GREEN or BLUE
GIGABIT Wi-Fi INTERNET ACTIVATION AND
AP AND CLIENT IN STALLAT ION
Section 3
Activating the Gigabit Data Wi-Fi Network
By default, the GXT542U Internet Network and associated SSID are
not pre-configured.
Steps 1 and 2 – Refer to Section 1, Steps 1 and 2 instructions
on page 2 Multicast (IPTV) Video Bridge AP Installation.
When Multicast Video (IPTV) and
Internet Data originate on the SAME
ONT/ RG port, connect the single
Ethernet port to the GXT542U.
Home Gateway or
Cable/DSL Modem