User's Manual

B. Insert one end of an Ethernet cable into the Video LAN port

of the ONT/ RG with the other to the GXT542U’s RJ-45 port.

Section 2

DO NOT connect both

Ethernet ports on the AP to the

same subnetwork ports on the

ONT/Gateway as this will

create a loop and disrupt

traffic.

Multicast (IPTV) Video Bridge Client Installation

After installing a GXT542U AP per Section 1, Clients can be added

using the steps below:

Step 1 – Unit

Mode

Configuration

Set the unit mode switch at the back of the unit to STA

(Right position) as illustrated below.

Step 2 -

Power

and LEDs

A. Plug in the 12V A/C adapter and connect it to the

XT5

STA unit. Verify the AP / STA LED is GREEN

indicating Client (STA) mode.

Home Gateway or

Cable/DSL Modem