User's Manual

2
MULTICAST (IPTV) VIDEO B RIDG E
INSTALLAT ION
Section 1
Multicast (IPTV) Video Bridge AP Installation
The initial GXT542U must be installed as an AP
Step 1 – Unit Mode Configuration
A. On the back of the device, set the unit mode switch to A P
(left position) as illustrated bel
ow .
Step 2 –
Power and LEDs
A. Plug in the 12V A/C adapter and connect it to the GXT542U
AP. Verify the
AP / STA LED is BLUE indicating AP mode.
Changing the mode from AP (Blue)
to Client or Station (STA) (Green)
requires a power cycle.
Step 3 – Placement and network connections
A. Place the GXT542U AP near the ONT/Residential Gateway