User's Manual

48 CHAPTER 4: ACCESS POINT CONFIGURATION
Configuration Tools Figure 28 Configuration Tools Screen
Select the Configuration tab to display the Configuration screen (Figure 28).
Backup Configuration
Select BACKUP to save the current Access Point configuration. You will be
prompted to download and save a file to disk.
Restore Configuration Data
If you want to reinstate the configuration settings previously saved to a file,
Select Restore from Store Configuration File.
Reset to Factory Default
If you want to reset the settings on your Access Point to those that were loaded
at the factory, select Restore OfficeConnect to Factory Defaults. You will lose
all your configuration changes. The Access Point reverts to a DHCP client and
will therefore restart requiring a new IP address. To communicate with the
Access Point you may need to rerun the DISCOVERY software to find out the
IP address of the Access Point. See Appendix A
for more information. You
may need to reconfigure and restart your computer to re-establish
communication with the Access Point.