User's Manual

Accessing the Wizard 27
LAN Settings Figure 12 LAN Settings Screen
This screen determines how the Access Point obtains its IP address. There are
three options.
Obtain IP Address automatically - The Access Point will obtain an IP
address from a DHCP server already operating on your network.
Specify an IP address manually - Select this option to manually configure
the IP address of the Access Point. The screen shown in Figure 14
is
displayed. This screen displays a suggested LAN IP address, subnet mask and
default gateway of the Access Point. It also allows you to change the IP
address, subnet mask and default gateway.
3Com recommends that you manually assign your Access Point a static IP
address.