User's Manual

24 CHAPTER 3: RUNNING THE SETUP WIZARD
7 If the password is correct, the Country & Mode Selection screen appears.
(Figure 9
)
8 Select the country in which the Access Point is to operate.
The Country Selection screen is only displayed on initial configuration of the
Access Point.
Figure 9 Country Selection Screen
9 When you have logged in and selected a country either:
■ The Status screen will appear (Figure 10). Select the Wizard option from
the menu on the left hand side.
or
■ If your Access Point has not been configured before, the Wizard page will
be shown (refer to Figure 10
).
10 Click Next.
11 You will be guided step by step through a basic setup procedure.