User's Manual

22 CHAPTER 3: RUNNING THE SETUP WIZARD
Figure 5 Discovery Welcome Screen
3 When the Welcome screen is displayed, select the NIC from which the Access
Point will be discovered. Then click on Next and wait until the application
discovers the Access Points connected to your LAN.
Figure 6 Discovered Access Point Screen
4 Figure 6 shows an example Discovered Devices screen. Highlight the Wireless
11a/b/g Access Point by clicking on it, and press Next.
If the discovery application finds multiple Access Points compare the serial
number on the Discovered Devices Screen with the serial number on the base
of your Access Point.