User's Manual

16 CHAPTER 1: INTRODUCING THE ACCESS POINT
Rear Panel The rear panel (Figure 3) of the Access Point contains one LAN port, a reset
button, a power adapter OK LED and a power adapter socket.
Figure 3 Access Point - Rear Panel
5 Wireless Antennae
The antennae on the product should be placed in a ‘V’ position when initially
installed.
CAUTION: Do not force the antennae round further than 90 degrees in either
direction.
6 Power Adapter Socket
Only use the power adapter supplied with this Access Point. Do not use any
other adapter.
7 Power Adapter OK LED
Green
Indicates that the power adapter is supplying Power to the Access Point. If the
LED is off, there may be a problem with the power adapter or adapter cable.
8 Ethernet Port
Use the supplied patch cable to connect the Access Point to the LAN. The port
will automatically adjust to the correct speed and duplex.
9 Reset Button
This button allows you to reset the unit to factory defaults.
8 9
Ethernet
5 5
RESET
6 7
OK