Using the Adapter Mode 1 Connect to a Wireless Network Click “Networks Available” from the quick-navigation links. 2 3 4 (1) 5 6 7 (2) (3) (4) (5) (6) (7) 2. Scan Clicking the “Scan” button will give you the most up-to-date data list of available networks. 10 SSID 11 The SSID is the wireless network name. 3. BSSID/MAC Address This gives the MAC address of the available network. 4. Encryption Identifies the type of network security implemented (WPA or WEP).
Using Troubleshooting the Adapter Mode Restart Client You can restart your Router (in Adapter Mode) without losing any of your configuration settings by clicking “Restart Client”. Restore Factory Defaults Clicking “Restore Factory Default” will erase all your current settings. Save Backup Settings You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed.
Troubleshooting 1 Problem: Installation CD does not automatically start. Solution: If the CD-ROM does not start the Easy Install Wizard automatically, it could be that the computer is running other applications that are interfering with the CD drive. 1. If the Easy Install Wizard screen does not appear within 15—20 seconds, open up your CD-ROM drive by double-clicking on the “My Computer” icon that is located on your desktop. 2 3 4 5 6 2.
Troubleshooting Problem: The Easy Install Wizard cannot find my Router. Solution: If the Easy Install Wizard is not able to find the Router during the installation process, please check the following items: 1. Check to see if the switch on the back of the Router has been set to “Router Mode.” 2. Unplug power to the Router for 10 seconds, and then plug the power back into the Router. Ensure that the Router’s “Power” light is on; it should be solid green.
Troubleshooting 2. Unplug the cable or DSL modem from its power source for three minutes. After three minutes, plug the modem back into its power source. This may force the modem to properly recognize the Router. 3. Unplug the power to your Router, wait 10 seconds, and then reconnect the power. This will cause the Router to reattempt communication with the modem. If the “Ethernet” light on the Router is not lit after completing these steps, please contact Belkin Technical Support. 4.
Troubleshooting 2. Open your wireless utility software by clicking on the icon in the system tray at the bottom, right-hand corner of the screen. If you are also using a Belkin Wireless Card or Adapter with this Router, the tray icon should look like this (the icon may be red or green): 3. The exact window that opens will vary depending on the model of wireless card you have; however, any of the utilities should have a list of “Available Networks”—those wireless networks it can connect to.
Troubleshooting 1 Problem: I can’t connect to the Internet wirelessly, and my network name is not listed. 2 Solution: 3 If the correct network name is not listed under “Available Networks” in the wireless configuration utility, please attempt the following troubleshooting steps: 1. Temporarily move your computer, if possible, five to 10 feet away from the Router. Close the wireless configuration utility, and reopen it.
Troubleshooting In order to determine if wireless issues are related to range, we suggest temporarily moving the computer, if possible, five to 10 feet away from the Router. Changing the Wireless Channel—Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. The default channel the Router is shipped with is channel 11.
Troubleshooting 1 Technical Support You can find technical support information at: http://www.belkin.com/networking or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call: US: 877-736-5771 or 310-898-1100 ext.
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7233 to which this declaration relates, complies with Part 15 of the FCC Rules.
Information • • • • Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Information Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required.
Wireless G Travel Router Belkin Tech Support US: 877-736-5771 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Compton, CA 90220-5221, USA 310-898-1100 310-898-1111 fax Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax Belkin B.V.
