User's Manual

14
Connecting and Configuring your Router
Connecting and Configuring your Router
2.1
Connect one end of the included
Ethernet cable into the Router and
the other end into a hotel’s Internet
connection or a cable/DSL modem.
Next, plug the included power
supply into the Router, and then
click “Next”.
2
. Connect Connecting the Router’s Cables
. Connect Connecting the Router’s Cables
2.2
From your PC, wirelessly connect
to the Router using your PC’s
built-in wireless card or external
wireless adapter. The network
name (SSID) of the Router is
“Belkin Traveler”. Once you have
connected wirelessly, click “Next”.
2.3
Select one of the following:
Hotel Connection
– Select “Hotel
Connection” if you are in a hotel.
CLICK “NEXT” AND FOLLOW THE
INSTRUCTIONS IN STEP 3.
Cable/DSL Connection
– If you
are using a cable/DSL modem,
select “All Other Connections”.
CLICK “NEXT” AND FOLLOW THE
INSTRUCTIONS IN STEP 4.