User's Manual

C ONFIGURING THE S PEED T OUCH 180
3-6
Please refer to the table below for a description of these differences.
Reset
If at any time the SpeedTouch 180 becomes unresponsive, it may be
necessary to perform a reset. To perform a system reset, unplug the power
and depress the RELOAD button. Restore the factory defaults by holding
down the RELOAD button for at least five seconds while powering up the
device. (The default password is admin.)
Language Settings
The SpeedTouch 180 offers a choice of the following languages:
English
German
Spanish
French
Italian
Dutch
Mode
Description
Access Point
Mode
Contains extra security features. These features - WPA, and
802.1x are described in detail the Wireless, Access Point
Mode section on page 3-10.
Client Bridge
(Infrastructure)
Mode
To enable a wireless connection to your ethernet device,
for example an Xbox, please refer to the configuration page
3-30.
Client Bridge
(AdHoc) Mode
Play head-to-head games using Client Bridge (Ad Hoc)
mode. This process is described on page 3-31.
Repeater Mode In Repeater mode the user must configure the additional
Repeater Settings. Refer to page 3-21.