User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Configuring the SpeedTouch 180
- Appendix A Troubleshooting
- Appendix B Cables
- Appendix C Specifications
H
ARDWARE
D
ESCRIPTION
2-5
LED Indicators
The LED indicators are illustrated in the following figure and table.
Figure 2-1. LEDs
LED Status Description
WLAN Green Connection has been established.
Blinking The WLAN port is sending or receiving data.
Off Wireless feature has been disabled from the user
interface. The "Enable Wireless Networking" check
box has been de-selected.
LAN Green The connection is established at 100 Mbps.
Yellow The connection is established at 10 Mbps.
Blinking The indicated LAN port is sending or receiving data.
Off There is no traffic on the port.
Power Green The SpeedTouch 180 is receiving power.
Blinking Device is rebooting.
Off Power off or failure.
Power
Ethernet
Link/Activity
Wireless
Link/Activity