User's Manual
Table Of Contents
- Applications
- Ordering Information
- Product Description
- Functional Block Diagram
- Pin Out Diagram
- Pin Out Description
- Absolute Maximum Ratings
- Recommended Operating Conditions
- DC Electrical Characteristics
- Logic Characteristics
- AC Electrical Characteristics
- Figure 3: SE2565T Detector Characteristics
- Package Diagram
- Recommended Land and Solder Patterns
- Package Handling Information
- Branding Information
- Tape and Reel Information
- Document Change History
DATA SHEET
SE2565T: 2.4 GHz High Power Wireless LAN Power Amplifier
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202424A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 5
Power Detector Characteristics
Conditions: VCC = EN = 3.3 V, T
A = 25 °C, as measured on Skyworks Solutions’ SE2565T-EV1 evaluation board,
unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 2400 - 2500 MHz
PDR
Power detect range,
CW
Measured at RF out 0 - 26 dBm
PDZsrc
DC source impedance
on PD_OUT
- - 2.3 - KΩ
PDZLOAD DC load impedance - - 26.5 - KΩ
PDVNoRF
Output Voltage, P
OUT
=
5dBm
Measured into 26.5KΩ - 0.33 - V
PDVp23
Output Voltage, P
OUT
=
23 dBm CW
Measured into 26.5KΩ - 0.70 - V
PDVp27
Output Voltage, P
OUT
=
27 dBm CW
Measured into 26.5KΩ - 0.97 - V
LPF-3dB
Power detect low pass
filter -3dB corner
frequency
Measured into 26.5KΩ - 2.0 - MHz
Figure 3: SE2565T Detector Characteristics