User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Router
- 02 /
- CONNECTING YOUR Fios Home Router
- 2.0/ Setting up Your Fios Home Router
- 2.1/ Expanding Wi-Fi coverage
- 2.2/ Computer Network Configuration
- 2.3/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING Network SETTINGS
- 4.0/ Accessing Network Settings
- 4.1/ Using Network Settings
- 05 /
- USING NETWORK CONNECTIONS
- 5.0/ Accessing Network Connections
- 5.1/ Network (Home/Office) Connection
- 5.2/ Wireless Access Point Connection
- 5.3/ Ethernet Connection
- 5.4/ Broadband Connection
- 06 /
- SETTING PARENTAL CONTROLS
- 6.0/ Activating Parental Controls
- 6.1/ Rule Summary
- 07 /
- CONFIGURING SECURITY SETTINGS
- 7.0/ Firewall
- 7.1/ Access Control
- 7.2/ Port Forwarding
- 7.3/ Port Triggering
- 7.4/ DMZ Host
- 7.5/ Static NAT
- 7.6/ IPv6 Pinholes
- 08 /
- CONFIGURING ADVANCED SETTINGS
- 8.0/ Using Advanced Settings
- 8.1/ Utilities
- 8.2/ Network Settings
- 8.3/ Date And Time
- 8.4/ DNS Settings
- 8.5/ Monitoring
- 8.6/ System Settings
- 09 /
- TROUBLE
- SHOOTING
- 9.0/ Troubleshooting Tips
- 9.1/ Frequently Asked Questions
- 10 /
- SPECIFICATIONS
- 10.0/ General Specifications
- 10.1/ LED Indicators
- 10.2/ Environmental Parameters
- 11 /
- NOTICES
- 11.0/ Regulatory Compliance Notices
NETWORK HOME/OFFICE CONNECTION
2. Configure the following sections, as needed.
GENERAL
In the General section, verify the following information:
• Status - displays the connection status of the network.
• Network – displays the type of network connection.
• Connection Type - displays the type of connection
interface.
• Physical Address - displays the physical address of the
network card used for the network.
• MTU - displays the Maximum Transmission Unit (MTU)
indicating the largest packet size permitted for internet
transmissions:
– Automatic: sets the MTU (Maximum Transmission
Unit) at 1500.
– Automatic by DHCP: sets the MTU according to the
DHCP connection.
– Manual: allows you to manually set the MTU.