User's Guide

COMPUTER NETWORK CONFIGURATION
./ COMPUTER NETWORK CONFIGURATION
Each network interface on your computer should either
automatically obtain an IP address from the upstream Network
DHCP server (default configuration) or be manually configured with
a statically defined IP address and DNS address. We recommend
leaving this setting as it is.
2.2a/ CONFIGURING DYNAMIC IP ADDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1. In the Control Panel, locate Network and Internet, then
select
View Network Status and Tasks.
2. In the
View your active networks – Connect or disconnect
section, click Local Area Connection in the Connections
field. The Local Area Connection Status window displays.
3. Click
Properties. The Local Area Connection Properties
window displays.
4. Select
Internet Protocol Version 4 (TCP/IPv4), then click
Properties. The Internet Protocol Version 4 (TCP/IPv4)
Properties window displays.
5. Click the
Obtain an IP address automatically radio button.
6. Click the
Obtain DNS server address automatically radio
button, then click
OK.
7. In the Local Area Connection Properties window, click OK
to save the settings.