User's Guide

NETWORK SETTINGS
4. Click Apply to have changes take eect.
Note: The Internet IPv6 service is required for this feature to
work over the internet.
5. To disable the IPv6 service, click on the Disable option in the
Enable IPv6 Support field.
6. Click Apply to have changes take eect.
Once configured using valid IPv6 WAN and LAN configurations, you
should not see any errors when you click on the Apply button and
the Status page on the main menu will reflect the router’s new IPv6
address.
You should also see the IPv6 address for all IPv6 supported
devices on your local network displayed on the Network/Network
Status page.