User's Manual

A DVANCED SETUP
4-19
PPPoE
Enter the PPPoE settings provided by your ISP.
Parameter Description
VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) supplied by your ISP.
Encapsulation Select the encapsulation used by ISP from the
drop-down menu.
IP assigned
by ISP
Select Yes if you have a dynamic IP address. Select
No if you have a static IP address.
IP Address Enter the IP address provided by your ISP. For
dynamic IP, leave this field blank.
Subnet Mask Enter the Subnet Mask address provided by your ISP.
For dynamic IP, leave this field blank.
Connect Type Sets connection mode to Always connected,
Auto-Triggered by traffic or Manual connection.
For flat rate services use Always connected.