User's Manual

Advanced 83
Advanced From the Advanced screen, you can configure:
■ Security
■ Static Routes
■ RIP
■ DDNS
■ SNMP
■ Syslog
■ Proxy Arp
Security Using this advanced security settings page to set the detail settings for
the Router.
Figure 71 Security Screen
■ NAT — Before you enable NAT (Network Address Translation), make
sure you have changed the administrator password. NAT is the
method by which the router shares the single IP address assigned by
your ISP with the computers on your network.
This function should only be disabled by advanced users, and if your
ISP assigns you multiple IP addresses or you need NAT disabled for an
advanced system configuration. If you have a single IP address and