User's Manual

A
IOS-5.0 P a g e : 7

 VDD5_IN SPEC:
3-3-2 Power Consumption
Test Environment: Broadcom Yocto GA3.1.2
Measurement Point: 80pin 5V rail
Baseboard: Arcadyan Test-JIG
USB: Memory Device connected (USB Model Name: Transcend JetFlash 500 )
Ethernet Cable: Plugged
Active Mode
1. 80pin: 5V line and Ground,
2. Wi-Fi AP Mode ON and Client Join.
3. LAN Port IN
4. USB 2.0 Storage device
Network Standby Mode: LPM (Low Power Mode)
Run the command “./wol-suspend.cmd”
Name Ethernet Wireless
Condtion-1 Plugged / Power Save Power Off
Condition-2 Plugged / Power Off Client mode, Connected to AP / Power Save Mode
Condition-3 Plugged / Power Save Client mode, Connected to AP / Power Save Mode
Sleep Mode
:
Description – only AON_GPIO, WoWL & WOW(magic package) active.
Run the command “echo mem > /sys/power/state”
Power off Mode: