User Manual

C ONFIGURING THE B ARRICADE
4-16
If the parameters are correct, click FINISH to save these settings.
Your Barricade is now set up. Go to “Troubleshooting” on page A-1 if you
cannot make a connection to the Internet.
ADSL Operation Mode (WAN)
ISP The name of the ISP you have selected from list.
Protocol The WAN protocol of your ISP. If you are unsure if the
selected protocol is correct check with your ISP.
VPI/VCI Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). If you are unsure the VPI/VCI values are correct
check with your ISP.
AAL5 Encapsulation Shows the packet encapsulation type. If you are unsure
the selected Encapsulation is correct check with your ISP.
Go to page 4-21 for a detailed description.
Network Layer Parameters (WAN)
IP Address WAN IP address (only displayed if you have static IP).
Subnet Mask WAN subnet mask (only displayed if you have static IP).
Default Gateway WAN gateway (only displayed if you have static IP).
DNS Server The IP address of the DNS server. If the DNS address
field was left blank in previous steps the address will be
displayed as 0.0.0.0.
ISP Parameters
Username The ISP assigned user name.
Password The password (hidden).
Parameter Description