User Manual

C ONFIGURATION PARAMETERS
4-37
WEP
To automatically generate encryption keys using the passphrase function,
when Key Entry Method is set to Hex, enter a string into the passphrase
field, then click Generate. Select the Default Key ID from the
drop-down menu and click SAVE SETTINGS.
To manually configure the encryption key, enter five hexadecimal pairs of
digits for each 64-bit key, or enter 13 pairs for the single 128-bit key.
Note: A hexadecimal digit is a number or letter in the range 0-9 or A-F.
The passphrase can consist of up to 32 alphanumeric characters.
Parameter Description
WEP Mode Select 64 bit, or 128 bit.
Key Entry Method Select Hex, or ASCII.
Key Provisioning Select Static, or Dynamic. If you select Static, you
will need to configure the Static WEP Key Setting
section. If you choose Dynamic, then 802.1X
authentication should be enabled.