User's Manual

10
www.arcadiannetworks.com
# Problem Description Possible Cause Potential
Resolutions
2 The LAN&USB LED
does not light up.
• The connection
between the
modem and the PC
may be faulty.
1. Check the
10/100BaseT
cable connection.
2. Check the
network
configuration: IP
address,
Gateway, DHCP,
and DNS.
3. Reset the
modem by
disconnecting and
reconnecting the
power.
4. Replace the
NIC Ethernet
card.
5. Test the
connection using
another modem or
network device.
3 The RF LINK LED is
blinking or off, and the
STATUS LED is off.
• There is no RF
signal.
1. Check coaxial
cables, power
inserter,
transformer,
antenna direction
and/or splitter.