User Manual

5 Maintaining the Base Station
56
; Note: The WMTS will not execute a System Restart command before the file transfer is
complete.
Verify that the last line in the Command Log window is ‘WMTS Restart’. The WMTS
reboots and uses the new RegTree.rtr file to configure itself.
Figure 22: System Restart Message
; Note: The WMTSConfig Command Log only displays messages sent to the WMTS. It
does not know whether any of the commands succeeded.
Checking the WMTS Version
This procedure is a continuation of the WMTS upgrade process (refer to Upgrading the
WMTS Software on page 3), in which the WMTS Configuration Tool is used.
To Verify the WMTS version:
1. Open WMTSConfig.exe tool if it is not currently open. This tool is located in the
…\{build}\\Tools\WMTSConfig directory of the build.
Right-click to display a popup window from which you select Activate (see
Figure 16).
The WMTSConfig screen is enabled.
2. Right click any open area in the main window of the WMTS Configuration Tool to
bring up the popup menu.