User Manual

5 Maintaining the Base Station
Base Station User Guide 49
Sharp IF Filter Card LEDs
LED Color Indication
Active
Green ON when WMTS power is on
Hot Swap
Red
If lit, after pressing HOT SWAP
switch, the card can be pulled
out and released
Connector/Switch Type Function
IN
F-type Connection to 43100A
 ownconverter, used to input
signals for filtering
OUT
F-type Connection to 4-way splitter,
used to output filtered signals
Hot Swap Push
button
Request for Card release while
system is ON
Sharp
IF filter
Sector 3
IN
Active
OUT
Hot swap
Sector 1
IN
Active
OUT
Sector 2
IN
Active
OUT
; Note: The Sharp IF Filter card is optional.