User Manual

4 Configuring the Base Station
Base Station User Guide 43
Configuration Tools
The configuration tools listed below are located in the tool&utilities disk that arrives with
the Base Station and which the technician should copy to his/her laptop.
Table 5: Base Station Configuration Tools
Tool Configured File or Device Description
WMTSConfigurationFileEditor
(any standard ASCII text file
editor may also be used to edit
the text version of the file)
Regtree.txt
Regtree.rtr (downloadable
version of the text file)
Regtree.txt contains the permanent
IP address of the WMTS. This tool
is a convenient way to edit the more
common items in the file. However,
when editing the WMTS IP address
you must use a standard text editor.
The Regtree file may be saved in
either text or downloadable format
using this tool.
SETIP.BAT Regtree.txt
This batch file is used to convert the
text version of the Regtree file to the
downloadable format (Regtree.rtr).
This batch file calls RTR2TXT.EXE
and RECFMT.EXE to perform the
conversion.
RTR2TXT.EXE Regtree.rtr
Used to convert the Regtree.rtr file to
a standard text file (Regtree.txt)
WMTSConfig WMTS
Used to assign temporary IP settings
to the WMTS and to download files
to the WMTS. Specifically, it must be
used to download the compiled
version of the Regtree.txt file to the
WMTS. This is primarily used during
initial setup.
Arcadian Networks
Configuration Tool
WMTS MIB database
This is a standalone JAVA based
tool that can be accessed from the
NMS. It is used to modify and
configure the WMTS operating
parameters.
Configuring the WMTS
You can optionally configure the WMTS upstream or downstream parameters using the
Arcadian Networks Configuration Tool. To do so, refer to the NMS User Guide.