User Manual

4 Configuring the Base Station
42
the receiver, since the receiver SNR is influenced by additional parameters (phase
noise, interference, etc.).
The WMTS Hex card receiver input level is set using the upstream “Gain” feature in the
Upstream Channel Configuration Menu of the Arcadian Networks Configuration Tool
(refer to the NMS User Guide).
Following the Hex card receiver input level setting, and integration with the Monitoring
Modem, the RF SNR should carefully be checked at the relevant test points (T5, T6,
and T7). The full procedure is described in paragraph 3.3.2 of the FAT document.