User Manual

3 Installing the Base Station
34
To Connect to the WMTS:
1. While the application is active, click Connect (see Figure 17).
The Connect window appears, enabling you to choose the type of connection to
open (Serial or IP).
Figure 18: Specifying the Connection Type
2. Connect the Ethernet cable from the PC to the Ethernet port on the WMTS Control
& Forward card.
3. In the Connect window (Figure 18):
 Select IP address and specify the IP address of the WMTS.
; Note: The WMTS is shipped with the default IP address of 10.10.10.2. If this is a first
time installation use this address.
To Download RegTree.rtr:
1. In the main application window (Figure 19), in the TFTP Software Upgrade section
 Enter your PC IP address in the TFTP Server IP Address field
 Enter the file name, regtree.rtr, in the Version File field.
2. Click Start Software Download.
After the download command is sent to the WMTS, a message appears in the
Command Log window of the WMTSConfig tool (see Figure 19). This message
does NOT indicate that the download has occurred.