User Manual

3 Installing the Base Station
30
Editing and Downloading the Regtree File
This process includes the following steps:
 Editing the Regtree file.
 Setting the network properties in the Regtree file.
 Compiling the Regtree file.
 Running TFTP server.
 Running WmtsConfig tool.
 Connecting to the WMTS.
 Downloading the new Regtree file.
To edit the Regtree file:
 The regtree.txt file is located under directory \{build}\Wmts\{swversion}\SET-IP.
Open the regtree.txt using a standard text editor, such as Notepad.
; Note: There may be several versions of the Regtree file available (e.g.,
regtree_bandA.txt). If so, copy the version you wish to use and rename it to
regtree.txt since that is the file that SETIP.bat expects as its input file.
To set the WMTS network properties in Regtree.txt:
1. Scroll down, or use the Find function, to locate the CmtsIPAddress entry. In this
example (Figure 13) its value is 10.10.10.210. The default network address for
Arcadian Networks equipment is 10.10.10.xxx.
Figure 13: Regtree.txt File Contents
2. Change the following entries as follows:
 CmtsIPAddress – IP address of the WMTS.