Manual

All areas of the breech, slide, magazine, chamber and bore should be
scrubbed or wiped clean with a cleaning patch wetted with a gun powder
solvent. After all areas have been thoroughly cleaned, wipe again with
lightly oiled cloth.
Prior to shipment, each
,380 D.A.O. pistol is inspected and tested to ensure
that it is in proper operating condition. Should the pistol require adjustment,
repair or refinishing, we recommend that the pistol be returned directly to
the factory SERVICE DEPARTMENT! There is no other way to be sure
that work is performed in a properly equipped and staffed facility. Failure
to use the factory services will result in voiding your warranty.
Except for guns still under warranty, all work will bear a net minimum
charge of $15.00.
All pistols returned are to be.sent unloaded prepaid. All collect shipments
will be refused.
For best service, always enclose a cover letter with the pistol furnishing
serial number, model of pistol and the nature of the problem or work
desired. A statement that the pistol is “defective”
is not adequate and will
only result in unnecessary delays. Try to be as specific as possible.
Federal regulations control the shipment
of firearms. It may be impossible
for the factory to return a pistol directly
to you. Check your local
regulations before shipment. If this is the case, we recommend that all
firearms be sent through a federally licensed dealer.
Please be sure that both the magazine and the chamber are empty before
shipping. Any firearms received in a loaded condition
must be reported to
the federal authorities.
PARTS AND ORDERING
All parts orders should be sent to the attention of the Parts Department.
California residents include applicable sales tax.
When ordering parts, specify Model Name, .Part Name and Part Number.
Also include the complete serial number of the firearm.
Parts designated by an (‘) asterisk must be factory fitted. The prices shown do
not include labor, shipping and tax, if applicable. These parts will be replaced
on an exchange basis only. The replaced parts will not be returned to you.
Wear Safety Glasses and Ear Protection at all times when shooting!