Operation Instructions

4
2
3
Residual heat indicators
After using the cook top, residual heat remains in the cooking zone.
The digital display shows the code “H”, warning to stay away from the
cooking zone .
Auto shut off protection
Installation
Preparation of bench top
Cut hole
into bench top according to the sizes shown in the figure 1.
1
Power level 1 2 3 4 5 6 7 8 9
Default working
time(hour)
8 8 8 4 4 4 2 2 2
m
m
0
7
5
m
m
0
0
5
For the purpose of installation and use, a minimum of 50 mm space is
required from rear wall and 75mm to any side vertical surface from the
cutout hole. Bench top should be at least 30mm in thickness
.
m
m
0
9
5
m
m
0
2
5
n
i
m
m
m
0
5
n
i
m
m
m
5
7
n
i
m
m
m
5
7
30 mm
min
During use, the cook top will shut off automatically a cooking zone when
the default working time is reached, for that selected power level. The
time is based on no adjustment being made to either power or timer
setting for the cooking zone. If several cooking zones are working
simultaneously, the cook top will automatically shut off any zone that
reaches it’s default time. The default working time for various power levels
are shown in the table below.
Safety Features