Instruction Manual

Flex 12VRX/8VRX Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 20 of 43
7. General Specifications
Frequency Range : 433MHz ~ 440MHz (FCC)
863MHz ~ 870MHz (CE)
Number of Channels : 141 channels(FCC)/62 channels(CE)
Channel Spacing : 50K(FCC) / 100 KHz(CE)
Modulation : Digital Frequency Modulation based
on Manchester Code, 20bit address,
32bit CRC and Hamming Code.
Encoder & Decoder : Microprocessor-controlled
Receiver Type : Frequency Auto Scanning
Receiver Sensitivity : -116dBm
Spurious Emission : -50dB
Antenna Impedance : 50 ohms
Enclosure Type : NEMA4
Enclosure Rating : IP66
Output Contact Rating : 250V @ 8 Amps
Receiver Power Consumption : 22VA (max)
Available Receiver Voltages : 110~240VAC , 0.3A , 50/60HZ
Operating Temperature : -25°C ~ 50°C / -13°F ~ 167°F
Receiver Dimension : 260mm (L) x 204mm (W) x 83mm (H)
Receiver Weight : 3.15kg / 6.9lb (include output cable)
Environment Condition
a) outdoor use
b) altitude up to 2000 Meters (6500 feet)
c) Maximum Relative Humidity 90%
d) MAINS supply voltage fluctuations up to ±10%
e) OVERVOLTAGE CATEGORY II
f) WET LOCATION, applicable
g) applicable POLLUTION DEGREE of the intended environment
( POLLUTION DEGREE 2 IN MOST CASES)