Instruction Manual

Flex 12EPV/8EPV Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 4 of 43
Table of Contents
Page
1. Introduction 5
2. Radio Controlled Safety 6
2.1. CRITICAL INSTALLATION CONSIDERATIONS 7
2.2. GENERAL 7
2.3. PERSONS AUTHORIZED TO OPERATE RADIO CONTROLLED CRANES 7
2.4. SAFETY INFORMATION AND RECOMMENDED TRAINING FOR RADIO CONTROLLED
EQUIPMENT OPERATORS 8
2.5. TRANSMITTER UNIT 9
2.6. PRE-OPERATION TEST 9
2.7. BATTERIES 9
2.8. Used symbol description 10
2.9. Method cleaning products 10
2.10. Product Maintenance 10
2.11. Power Supply 10
3. General System Information 11
3.1. Transmitter 11
3.1.1. 12EPV External Illustration 11
3.1.2. 8EPV External Illustration 12
4. Function Settings 13
4.1. Transmitter 13
4.1.1. Transmitter Firmware Version 13
4.1.2. Transmitter Channel Settings 13
4.1.3. Remote Pairing 15
4.1.4. Transmitter Start Function Settings 16
4.1.5. Transmitter Inactivity Timer Settings 16
4.1.6. Pushbutton Function Settings 17
4.1.7. Transmitter Access Card (TAC) Settings 22
4.1.8. Display Frequency Band 23
4.1.9. Output Feedback Settings 23
4.1.10. Infrared Function Settings 23
4.1.11. Zero-G Sensor Settings 23
5. Operating Procedures 24
5.1. General Operation 24
5.2. Changing Batteries 25
5.3. System Status Light Indications 26
5.3.1. Transmitter Status Indications 26
6. General Specifications 27