Instruction Manual

Flex 12EPH/8EPH Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 4 of 43
Table of Contents
Page
1. Introduction 5
2. Radio Controlled Safety 6
2.1. CRITICAL INSTALLATION CONSIDERATIONS 7
2.2. GENERAL 7
2.3. PERSONS AUTHORIZED TO OPERATE RADIO CONTROLLED CRANES 7
2.4. SAFETY INFORMATION AND RECOMMENDED TRAINING FOR RADIO CONTROLLED
EQUIPMENT OPERATORS 8
2.5. TRANSMITTER UNIT 9
2.6. PRE-OPERATION TEST 9
2.7. BATTERIES 9
2.8. Used symbol description 10
2.9. Method cleaning products 10
2.10. Product Maintenance 10
3. General System Information 11
3.1. Transmitter 11
3.1.1. 12EPH External Illustration 11
3.1.2. 8EPH External Illustration 12
4. Function Settings 13
4.1. Transmitter 13
4.1.1. Transmitter Firmware Version 13
4.1.2. Transmitter Channel Settings 13
4.1.3. Remote Pairing 15
4.1.4. Transmitter Start Function Settings 16
4.1.5. Transmitter Inactivity Timer Settings 16
4.1.6. Infrared Programming 17
4.1.7. Transmitter Access Card (TAC) Settings 17
4.1.8. Display Frequency Band 18
4.1.9. Infrared Function Settings 18
4.1.10. Zero-G Sensor Settings 18
5. Operating Procedures 19
5.1. General Operation 19
5.2. A/B Rotary Select Operation (AB models) 20
5.3. Pitch & Catch Operation 20
5.4. Transmitter Access Card (TAC) Operation 20
5.5. Changing Batteries 21
5.6. System Status Light Indications 21
5.6.1. Transmitter Status Indications 21
6. General Specifications 23