Instruction Manual

Flex 12EPH/8EPH Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 22 of 43
4
4 red blinks followed by a
2-second pause
Transmitter is unable to lock onto the
assigned channel
5
Constant green for up to
2 seconds
Transmitter power on with no faults detected
6
Blinking green
Transmission in progress
7
2 orange blinks followed by a
2-second pause
Receiver MAIN output jammed or defective
8
3 orange blinks followed by a
2-second pause
Decoding processors defective
9
Blinking orange
Pressing any pushbutton prior to executing
the START command at power on