Instruction Manual

Flex 12EPH/8EPH Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 16 of 43
4.1.4. Transmitter Start Function Settings
When transmitter goes into sleep mode the system is temporarily deactivated (MAIN output
opened). Execute the START command or press any pushbutton to wake up the system
(MAIN output closed).
4.1.5. Transmitter Inactivity Timer Settings
Set how long the transmitter enters the sleep mode when not in use (pushbutton not pressed).
When transmitter goes into sleep mode the receiver MAIN output are deactivated.
Dipswitch
Settings
Time
Dipswitch
Settings
Time
1
xxx000xxxx
1 minute
5
xxx100xxxx
10 minutes
2
xxx001xxxx
20 seconds
6
xxx101xxxx
30 minutes
3
xxx010xxxx
3 minutes
7
xxx110xxxx
60 minutes
4
xxx011xxxx
5 minutes
8
xxx111xxxx
Constant On
(sleep mode
disabled)
Dipswitch
Settings
Function
1
xxxxxxxxx0
START
Reactivation
2
xxxxxxxxx1
Any Button
Reactivation