Instruction Manual

Flex 2JB Standard, AB and Tandem Instruction Manual (FCC/CE)
July 20 2022
Page 14 of 14
3B No light displayed
When defective pushbutton condition
occurs (2 red blinks, type 3A above), find
out which pushbutton is defective by
pressing all of them one at a time. If the
pushbutton is in good working order when
pressed, the Status LED is off. If the Status
LED maintained 2 red blinks then
the pushbutton is defective.
4
4 red blinks followed by a
2-second pause
Transmitter is unable to lock onto the
assigned channel
5
Constant green for up to
2 seconds
Transmitter power on with no faults detected
6 Blinking green Transmission in progress
7
2 orange blinks followed by a
2-second pause
Receiver MAIN relays jammed or defective
8
3 orange blinks followed by a
2-second pause
Decoding processors defective
9 Blinking orange
Pressing any pushbutton prior to executing
the START command at power on