User Manual

12/EN
3. Turning the hob again, align and place it on
the counter.
4. You can secure your hob to the counter by
using the clamp and the screws supplied.
*
min. 20 & max. 40 mm
#
min. 50 mm
1
Hob
2
Screw
3
Installation clamp
4
Counter
5
P
utty
6
Separator plate
When installing the hob onto a cabinet, a
shelf must be installed in order to separate
the cabinet from the hob as illustrated in the
above figure. This is not required when
installing onto a built-in oven.
For example, if it is possible to touch the bottom
of the product since it is installed onto a drawer,
this section must be covered with a wooden plate.
Rear view (connection holes)
Rear view (connection holes)Rear view (connection holes)
Rear view (connection holes)
Making connections to different holes is not
a good practice in terms of safety since it
can damage the gas and electrical system.
Final check
1. Connect the power cable and switch on the
product's fuse.
2. Check the functions.