600mm Electric Cooktop with Solid Elements Manual MODEL ACS6SE2 Installation and Operation
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual Congratulations on choosing one our appliances, we hope you have many reliable years of use from this new appliance. We recommend that you read this manual for best performance and to extend the life of your appliance.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual CONTENTS Important safety information 4 Specifications 5 Product and cutout dimensions
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance . Please make sure that you read this instruction booklet before attempting to install or use the appliance.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual • • Great care should be taken whilst using this appliance and when following the cleaning procedure. You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual Hob surface layout 1500 watt thermostatic element 2000 watt thermostatic element 2000 watt thermostatic element Control knobs On / Off indicator 1500 watt thermostatic element Using the hob • • Before first use IMPORTANT: You should clean the hob surface and solid element plates (
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual Turning on an element and setting a power level • • • Turn the control knob of the zone that you wish to cook on, clockwise or anticlockwise until it reaches the power level that you desire.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual • • • • Although it is easier to clean some deposits whilst the hob surface is still warm, you should take care not to burn yourself if cleaning the hob surface when it is still warm. After each use Wipe the appliance over with a damp cloth and a little washing up liquid.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual 6 0 0 ’ mm 6 0 0 ’ mm 7 0 0 mm 7 0 0 mm 4 0 0 mm 4 0 0 mm m m 55 180 mm Cooker hood 50m m m 55 m 180 Without a cooker hood mm 5 0m m With a cooker hood Positioning (continued) This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending on size) or 600 mm worktop, providing the following
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual Heat shield requirement • IMPORTANT: When installing the cooktop above a drawer or cupboard with access from the underside a heat shield must be fitted a minimum 25mm below the base of the cooktop as illustrated below to prevent injury from heat generated from the cooktop.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual • out. On the underneath of the hob, adjust the clamps into a position that is suitable for your worktop. Then fully tighten the screws (C) to secure the hob into position.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual • • • • The brass links must be positioned as marked in the appropriate diagram and once established ALL terminal screws must be tightened down firmly.
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
