www.arcappliances.com.
Dear Customer Congratulations on purchasing your new product from Home Appliances. To register your Parts and Labour Warranty, some conditions apply, please refer to your warranty card for more details and contact our Aftersales Support team on: 1800 444 357 and Select 1 Our Customer Care Centre is there to ensure you get the most out of your appliance.
For future reference we suggest that you staple a copy of your purchase receipt here and complete the below so the information is always available. Model number AOI5 Description 60cm built-in oven Serial number (Note down prior to installation) Date of Purchase (DD-MM-YYYY) Place of Purchase Store name: Address: Telephone No. Invoice and / or receipt number Date of Installation (DD-MM-YYYY) Installers details Company Name: Licence No. Installers Name: Address: Telephone No.
CONTENTS WARNINGS 4 SAFETY HINTS 5 FITTING OVEN INTO THE KITCHEN CABINETS 6 DECLARATION OF COMPLIANCE 6 SAFETY TIPS 6 PRODUCT DESCRIPTION 7 HOW TO USE THE OVEN 7 Function Selection 7 Manual Operation (No Timer) 7 Timer Operation 7 Temperature Setting 7 Function description 7 ACCESSORIES 8 SHELF PLACEMENT 8 SECURING THE OVEN TO THE CABINET 8 DIMENSIONS FOR OVEN AND INSTALLATION 9 COOLING FAN 9 ELECTRICAL CONNECTION OF OVEN 10 BULB REPLACEMENT 10 CLEANING AND MAINTENANCE
WARNINGS • When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding agents used for the insulating panels and elements within the oven. This is completely normal, if it does occur, you merely have wait for the smell to clear before putting food into the oven.
SAFETY HINTS • Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or damp hands or feet. • Oven door should not be opened often during the cooking period. • The appliance must be installed by an authorized technician and put into use. The manufacturer is not responsible for any damage that might be caused by defective placement, and installation by unauthorized personnel.
FITTING THE OVEN INTO THE KITCHEN CABINETS Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a bench top or into a tower cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation, the measurements and distances adhered to when fixing the oven. If the oven is to work properly, the kitchen housing must be suitable.
PRODUCT DESCRIPTION Function Knob Timer knob Temperature Knob HOW TO USE THE OVEN • Function Selection - Turn the knob to the desired function for the type of cooking desired, refer to the table below for description of what each function can be used for. The oven will not start cooking until the Timer is set to Manual Operation or a set for Timer Operation (duration cooking time required) and desired Temperature selected. For some types of cooking the oven should be pre-heated.
ACCESSORIES NOTE: The number of accessories included depends on the particular appliance purchased. Wire chrome shelves : For grill dishes, cake pan with items for roasting and grilling. The shelves are fitted with stops to ensure the users safety and a rear bar to stop dishes from falling off the back of the shelf. Universal pan: For cooking large quantities of food such as moist cakes, pastries, frozen food etc. Also useful for collecting fat spills and meat juices.
DIMENSIONS FOR OVEN AND INSTALLATION 560mm 560mm 595mm A 570mm min. 575mm 595mm B 600mm C 600mm INSTALLATION NOTES: • If fitted with plug and lead the location of the power point cannot be mounted directly behind the the oven as this will impede the oven sitting correctly into the cabinet. • When mounted under bench and there is a bench above the oven, air flow ventilation is important to help keep the cabinets and oven electronics from getting to hot.
ELECTRICAL CONNECTION OF OVEN The installation must be carried out by a suitably qualified accordance with the current versions of the following. o o person, in AS/NZS 3000: 2007 Wiring Regulations 2010 Electrical Safety Regulations Before connecting the appliance, make sure that the supply voltage marked rating plate corresponds with your mains supply voltage.
REMOVING THE OVEN DOOR FOR CLEANING To facilitate the cleaning of the inside of the oven and the outer frame of the oven, the door can be removed as follows:The hinges (A) have two movable latches on them (B). If you raise both of the movable latches (B), then the hinges (A) are released from the oven housing. You should grip the sides of the door at the centre and then incline it slightly towards the oven cavity and then pull the door gently away from the oven cavity.
REMOVING THE INNER GLASS DOOR FOR CLEANING NOTE: Do not use any abrasive cleaner that could cause damage. Remember that if the surface of the glass panel becomes scratched, this could lead to a dangerous failure. To facilitate cleaning, the inner door glass can be lifted out. Refer to illustrations below. Grip the top and the bottom of the inner door glass panel. Gently pull the bottom of the inner door glass panel upwards.
TROUBLESHOOTING Here are a few suggestions if experiencing issue with your oven, if these do not help please call out After Sales team on 1800 444 357 for further assistance. The oven is not coming on Make sure the timer has been set operation or a cooking time selected.
TROUBLESHOOTING - Continued IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the our After Sales Team on 1800 444 357. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if a service technician is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
