Instructions / Assembly

B
5/16" SOCKET DRIVE
INCLUDED LAG BOLTS
"FOR WOOD ONLY"
C
D
ONCE YOU HAVE DETERMINED THE LOCATION OF
THE WALL BRACKETS, USE A CORDLESS DRILL WITH A
5/16" SOCKET DRIVER, AND THE INCLUDED SHEET
METAL SCREWS, TO FASTEN THE BRACKETS TO THE
HANDRAIL.
FASTENING MOUNTING BRACKETS
POSITION THE HANDRAIL USING THE MARKED
MOUNTING LOCATIONS FROM STEP#2. THIS STEP MAY
REQUIRE ASSISTANCE. WITH THE HANDRAIL IN PLACE,
USE A RATCHET WRENCH WITH A 1/2" SOCKET TO
INSTALL THE SUPPLIED LAG BOLTS.
FINAL INSTALLATION
FOR HANDRAILS LONGER THAN 8FT, TWO SECTIONS
WILL NEED TO BE JOINED TOGETHER. ALIGN THE TWO
SECTIONS AN FASTEN THEM TOGETHER WITH THE
SUPPLIED 1/4-20 FLAT HEAD FASTENERS.
LARGE HANDRAIL ASSEMBLY
INTERIOR WALLS:
USE THE INCLUDED LAG BOLTS FOR WOODEN STUD
WALLS.
EXTERIOR WALLS OR MASONRY SURFACES:
USE HARDWARE RATED FOR THE DESIRED MOUNTING
SURFACE. HARDWARE FOR MATERIALS OTHER THAN
WOOD ARE NOT INCLUDED IN THIS KIT
4
5
6