User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- 37 -
Using the Device
To use a static IP address, tab static and then congure the required
settings. When you're done with the settings, tap CONNECT.
Scroll down to congure more settings
such as gateway, netmask, etc.
To obtain a dynamic IP address from a DHCP server, select dhcp. Then
you will be taken back to the previous screen.
To use PPPoE mode, select pppoe. Then you will be taken back to the
previous screen.
3. When a wired LAN connection is established, the Wi-Fi connection will be
disconnected and an wired network icon will be displayed in the status bar.
A wired Ethernet
connection is established
Wi-Fi connection will
be terminated