User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- 35 -
Using the Device
1. Switch on the Bluetooth feature on the Settings page. Then tap Pair new
device.
2. The IOT-800N proceeds to scan for any Bluetooth device in range. Then it
displays the names of the device(s) found. Tap the device you want to pair
with.
3. When a paring code dialog box appears, tap Pair. The IOT-800N will then
send a connection request to the device you want to pair with.
On the device to pair with, a dialog box appears requesting to enter or
verify the pairing code. The passkey entered or shown on the IOT-800N
and the Bluetooth device must be the same.
Then the devices proceed to pair with each other.