User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- 27 -
Using the Device
3.2.1 Status Bar
Icon Descriptions
Bluetooth enabled
Wi-Fi enabled
LAN port is connected. A wired Ethernet connection will override a Wi-Fi
connection.
Roaming on a service provider’s partner network.
Power icon. Swipe down and you can see the voltage information.
Note: The device doesn't come with a battery inside. It always has to be
connected to a power source for power supply.
3.2.2 Using the Quick Settings Panel
Swiping down the top of the screen will bring up a Quick Settings panel
where
you can quickly access some most commonly used settings and features. To enable/
disable a feature or switch between available options, simply tap the intended icon. It
appears dimmed when disabled and brightened when enabled.
For some features such as Wi-Fi, Bluetooth, location, mobile data, you can also tap and
hold the tile to directly access the settings page.