User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- 20 -
Getting Started
2. Tap Setup > Device and then select the COM port you want to congure.
To congure the mode of RS-232/422/485 COM port, select COM3.
3. You will return to the previous screen. Select the settings you want to
congure and proceed. To congure the mode of RS-232/422/485 COM
port, select Serial Type and then select the mode you want to use.
Indicates the port to be congured:
/dev/ttyS3: COM3 (RS-232/422/485)
/dev/ttyS2: COM2 (RS-232)
/dev/ttyS0: COM0 (Reserved)
4. The setting will apply immediately upon your selection.