User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- 16 -
Getting Started
To remove the microSD card, just push the microSD card in to eject it from its
slot.
2.3 Antenna Installation
According to your IOT-800N model and requirements, you will need to install
the following antennas:
• Wi-Fi/Bluetooth antenna included in the accessory kit.
• Optional GPS antenna
To install the antenna(s), refer to the picture below to install the antenna to the
corresponding jack on the top side of the device.
GPS Wi-Fi
Wi-Fi antenna
GPS antenna
(optional)