User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- 10 -
Introduction
1.7.3 DI/DO and CAN Bus
• Description: Digi
•
• tal Input/Output and CAN Bus Connector
Connector Type: 3 x dry contact DI, 3 x dry contact DIO, 1 x CAN, OBD-II
Pin Description
10
1
V
0
1
2
0
1
2
L
H
DI
DO
CAN
1 DI PWR Supply
2 DI 0
3 DI 1
4 DI 2
5 DO 0
6 DO 1
7 DO 2
8 GND
9 CAN L
10 CAN H
OBD-II Supported Protocols
• ISO 15765 id 11bits 500kb
• ISO 15765 id 29bits 500kb
• ISO 15765 id 11bits 250kb
• ISO 15765 id 29bits 250kb
DI Example Circuit
Input = DI VCC = 1
Input = External Device GND = 0
DI Power Input
IOT-800N
DIO
DI x
External Device Power supply
(DI VCC) = 9V~32V