User's Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Using the Device
- 3.1 Power On/Off and Sleep Options
- 3.2 Home Screen
- 3.3 Configuring Your SIM Card
- 3.4 Enabling Wi-Fi and Connecting to a WLAN
- 3.5 Enabling Bluetooth and Pairing with Bluetooth Device
- 3.6 Connecting to a Network via LAN Port
- 3.7 Using the GPS Feature
- 3.8 Enabling and Using the NFC Features
- 3.9 Using the Camera Feature
- 3.10 Ignition Management
- Chapter 4 Troubleshooting
- 4 -
Introduction
1.4 Specications
System
CPU
ARM Quad-core Cortex-A35
OS
Android 8.1 (BTO service for Ubuntu and Buildroot)
Memory
2GB DDR4 memory soldered on board
Flash
16GB eMMC ash soldered on board
Peripherals and Devices
Front Camera
1 x 8MP resolution CMOS MIPI-CSI Type AF camera module
Audio
1 x built-in speaker (1W)
1 x built-in microphone
Wireless
WLAN
IEEE 802.11 /b/g/n
Bluetooth
Bluetooth 4.2, low power BLE
NFC
1 x 13.56MHz RFID & NFC reader with ISO
14443A/14443B/15693 & mifare
GPS
Supporting GPS / Galileo / Glonass / BeiDou / QZSS
(optional)
I/O Interface
SD Card
1 x microSDHC/microSDXC/ microSD (Max. 128GB) card
socket
USB
2 x USB 2.0 Type-A port
1 x micro USB 2.0
Speaker
1 x 8Ω/1W
DB9 Interface
1 x RS-232/422/485 COM port;
1 x RS-232 COM port
LAN
1 x RJ-45 Ethernet, 10/100Mbps
Power
Tact switch
CAN
Built-in Can Bus, OBD-II, supports:
ISO 15765 id 11bits 500kb
ISO 15765 id 29bits 500kb
ISO 15765 id 11bits 250kb
ISO 15765 id 29bits 250kb